Soundcore life p2 mini инструкция

More Manuals From Soundcore

Soundcore A3944031 Questions and Answers

---

---

---

---

---

---

---

In this user manual guide, we will review Soundcore Life P2 Mini True Wireless Earbuds User Manual. Let’s check this out.

Specifications

Input	5V ⎓ 0.6A
Rated output power	5 mW
Battery capacity	60 mAh x 2 (earbuds); 540 mAh (charging case)
Charging time	2 hours
Playtime (Varies by volume level and content)	Up to 8 hours (Total 32 hours with the charging case)
Driver size	10 mm
Frequency response	20 Hz – 20 kHz
Impedance	16 Ω
Waterproof level (Earbuds)	IPX5
Bluetooth version	5.2
Bluetooth range	10 m / 33 ft

What’s In The Box

• Life P2 Mini true wireless earbuds
• charging case
• XS/S/M/L/XL eartips
• USB-C cable.

Product/Features

Sound	Stunning sound via 10mm triple-layer dynamic drivers
Playtime Per Charge	8 Hours
Total Playtime with Charging Case	32 Hours
Fast Charging	Charge for 10 minutes, listen for 1 hour
Waterproof	IPX5
Bluetooth	Bluetooth 5.2
App	No
Calls	2 microphones with AI-enhanced uplink noise reduction
Other Features	Ultra-lightweight build, 3 EQ modes, touch control, USB-C
Recommended For	Business calls, commute, travel

Charging

• Fully dry off the earbuds and the USB port before charging.
• Use a certified USB-C charging cable and charger to prevent any damage.
• Fully charge both the earbuds and the charging case before the first use.

1. Place the earbuds in the charging case and close it.
2. Connect the charging case to the power supply by using a USB-C charging cable.

• The LED indicator on the charging case indicates the charging status.

Wearing

1. Choose the EarTips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.

• Your earbuds come with 5 pairs of EarTips, among which Medium-sized are pre-installed.

Powering On/Off

• Open the charging case, the earbuds will automatically power on.
• To power off, place the earbuds in the charging case and close it.
• The earbuds will automatically power off after 10 minutes if no device is connected.
• To manually power on, press and hold the touchpad on earbuds for 3 seconds.
• To manually power off, press and hold the touchpad on earbuds for 8 seconds.

Bluetooth Pairing

1. Tear off the insulation sticker on the earbuds before first use.
2. Place the earbuds in the charging case and close it.
3. Open the charging case (no need to take out the earbuds), the earbuds will automatically enter Bluetooth pairing mode.

• The 3 LED indicators on the charging case will flash white in sequence continuously.

4. Select “Soundcore Life P2 Mini” on your device’s Bluetooth list to connect. When successfully connected, the 3 LED indicators will turn white for 3 seconds and then turn off.

• Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the charging case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
• Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds only by placing the other one into the chaging case and closing it.
• When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.

Controls

Stereo Mode

Music

Play/Pause	Tap twice (R/L)
Next track	Press and hold for 2 seconds (R)
Previous track	Press and hold for 2 seconds (L)
Switch EQ in sequence: Signature (Default) / Bass Booster / Podcast	Tap three times (R)

Quickly tap the touch button on the right earbud three times to cycle through Soundcore Signature (default), Bass Booster, and Podcast modes. You will hear a tone for each successful switch.

• Soundcore Signature: Default EQ mode with well-balanced sound.
• Bass Booster: Enhances low-frequency sound.
• Podcast: Focus on mid-frequency for clearer voices.

Calls

Answer a call	Tap twice (R/L)
End/Reject a call	Press and hold for 2 seconds (R/L)

Mice

Activate Siri or other voice assistant software

Press three times (L)

Mono Mode

Play/Pause	Tap twice
Next track	Press and hold for 2 seconds
Answer a call	Tap twice
End/Reject a call	Press and hold for 2 seconds
Activate Siri or other voice assistant software	Tap three times

Reset

• You might need to reset the earbuds if you experience any connectivity problems or function issues.

1. Place the earbuds in the charging case and make sure they are being charged.
2. Press and hold the button on the case for 10 seconds until the 3 LED indicators flash white 3 times and then flash white in sequence continuously. This confirms that the reset was successful and your earbuds can be connected normally.

Mini Buds, Big Bass

Soundcore Signature

Realistic mids, soaring treble, and rich bass delivers a well balanced sound profile for listening to music and watching videos.

Bass Booster

Make bass heavy genres pack even more of a punch for an intensely satisfying listening experience.

Podcast

Tuned to enhance voices. Ideal for listening to podcasts, audiobooks, radio, and more.

Easy to Use

One Step Pairing

The moment you open the charging case, Life P2 Mini’s true wireless earbuds immediately enter pairing mode.

Bluetooth 5.2

Equipped with the latest Bluetooth technology for an ultra-stable connection.

Single Earbud Mode

Sometimes, you just want to use one earbud. Simply remove an earbud from the charging case, shut the lid, and start listening.

FAQ

Bluetooth

How do I connect Life P2 Mini if I’m using it the first time?

Step 1: Please make sure you remove the protective film from the earbuds when you’re using it for the first time.
Step 2: Put the earbuds back in the charging case and close the lid to power on the earbuds.
Step 3: Open the lid of the charging case and the LEDs will flash white in sequence continuously. (You don’t have to take out your earbuds).

What should I do if any of the following problems occur? 1. Only one earbud has sound. 2. One side of the earbud does not pair with the other or my device. 3. No music plays after connecting to my device. 4. Cannot pair or reconnect with my device.

Place the earbuds in the charging case and close the lid for 10 seconds. Then open the lid and try pairing again.

If that doesn’t work, try the following:

1. Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.
2. Reset the earbuds. See “How do I reset Life P2 Mini?” for more information.

What should I do if Life P2 Mini disconnects, the sound is choppy or has an audio drop issue?

Some environments (such as airports, offices, crowded public spaces etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:

1. Ensure that your phone is on the right hand side.
2. Download videos and songs instead of streaming.
3. If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.

Or you can try:

• Putting the earbuds back in the charging case and close it to re-pair your earbuds.
• Resetting the earbuds. See “How do I reset Life P2 Mini?”
• Try a different device if possible.

How do I connect to a second device?

If you want to pair Life P2 Mini with a second device, please use one of the following methods:

• Turn off Bluetooth on your current device so the earbuds can enter pairing mode.

1. Place the earbuds back into the charging case (Make sure the earbuds are powered on and keep the lid open).
2. To enter pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flashes white in sequence continuously.

Please do not remove the earbuds from the case before pairing them with a second device.

How do I set up Life P2 Mini when I want to use them to make calls via a Windows computer?

– Set up both the microphone and speaker as “Hands-Free”.

How do I reset Life P2 Mini?

1. Place the earbuds in the charging case and leave the lid open.
2. Press and hold the button on the case for 10 seconds until the 3 LED indicators blink white 3 times and then flashes white in sequence continuously. This confirms that the reset was successful and your earbuds have entered pairing mode.

Sound

What audio codecs does Life P2 Mini support?

SBC and AAC.

Why is there no difference between the 3 EQ modes?

1.  Make sure you switch on the EQ mode successfully. Triple tap the right earbuds and you will hear a sound.
2. If your original music doesn’t have bass, it won’t tell much difference. To distinguish between the EQ modes will depend on your music.
3. Make sure you are wearing both earbuds because the 3 EQ modes will not work if you use a single earbud.

Charging

How long does it take to fully charge the earbuds?

About 2 hours.

How long does it take to fully charge the charging case?

About 3 hours.

How can I charge the earbuds?

1. Confirm that the charging case has power left (open the lid of the charging case to check if there is any indication on the LEDs).
2. Put the left earbud in the charging case and if the left LED flashes twice, that means the earbud is connected to the case. Similarly, when you place the right earbuds in the case, the right LED will flash twice when connected.
3. Close the lid after placing the earbuds in the charging case and start charging.

What should I do if any of the following problems occur? 1) The earbuds don’t recharge in the charging case. 2) The earbuds stay connected to the device even after being placed in the charging case with the lid closed. 3) The earbuds don’t turn on when taken out of the charging case.

1. Confirm if the charging case has power left (open the charging case lid to check if there are any indications on the LEDs).
2. Clean the charging pins with a dry cloth and an alcohol-based disinfectant. This is to ensure all charging contact pins on the earbuds and charging case are completely clean and dry of sweat and water. Then, put the earbuds correctly into the case. When you put the earbuds back into the charging case, the first and third lights on the case will flash twice to indicate both earbuds are charging normally.
3. If they still do not turn on, put the earbuds back into the charging case and close the lid for 6 seconds, and try opening the lid again.

Charging protection mode?

When Life P2 Mini encounters the following problems, 3 LEDs will flash quickly to stop charging to enter protection mode. Please unplug the USB cable and place Life P2 Mini aside for at least half an hour then try again.

1. Short circuit, overcurrent or overheating.
2. Battery temperature is too high or too low.

Source

• soundcore.com
• Download User Manual – Download
• Product Page – Click Here

Read More

• Soundcore Life P3 Noise Cancelling Earbuds User Manual
• Soundcore Liberty Air 2 True Wireless Earbuds User Manual
• Soundcore Liberty Air 2 Pro Earbuds User Manual
• Soundcore Life P2 Wireless Earbuds User Manual 

Download the soundcore app to enhance your experience (Ambient Sound modes, adaptive noise control, HearID Sound, equalizer tuning, custom controls, firmware update, and more).

If your earbuds cannot connect with the soundcore app, update it to the latest version in your mobile app store.

Choose the Ear Tips that fit your ears best and take a fit test in the soundcore app to ensure you get the best ANC performance.

1. Tearoff the insulation sticker on the earbuds before first
2. Placethe earbuds in the charging case and close
3. Connectthe charging case to the power supply by using a certified USB-C charging  Alternatively, position the charging case at the center of your wireless charger for wireless charging.

• Fullycharge both the earbuds and the charging case before the first  When they are fully charged, the LED indicators will turn o

Open the charging case, the earbuds will automatically power on and enter Bluetooth pairing mode.

Select “soundcore Space A40” from your device’s Bluetooth list when connecting for the first time.

The earbuds can connect with two devices at the same time so you can switch between them effortlessly. Wear the earbuds, then press and hold the touchpad on both earbuds for 3 seconds simultaneously. Select “soundcore Space A40” from your device’s Bluetooth list to connect.

In the soundcore app, go to settings and select Dual Connections >

Connect New Device.

To manually enter Bluetooth pairing mode, place the earbuds in the charging case and leave the case open, then press and hold the button on the charging case for 3 seconds until the LED indicators flash white in sequence continuously.

You can also customize controls in the soundcore app.

To reduce unwanted ambient noise, select a noise cancellation mode in the soundcore app.

• AdaptiveMode: Automatically switch to the most suitable noise cancelling equalizer for different user
• ManualMode: Set the level of noise cancellation

To stay aware of your surroundings while listening to music, select a transparency mode in the soundcore app.

• FullyTransparent: Hear all ambient
• VocalMode: Voices stand out more clearly from other ambient
• Usedevices powered by Android 0 or later to experience LDAC quality sound.
• LDACprovides higher quality sound, increases power consumption, and reduces
• EnableLDAC in a low-interference environment to ensure a stable Bluetooth

1. Goto settings in the soundcore app. 2. Click on “Sound Mode“.
2. Select”Preferred audio quality” to switch to LDAC
3. Youwill be notified that the earbuds do not support LDAC when connected to two  Select “Turn on” to continue.
4. Ittakes about 10 seconds to switch audio  You may be requested to update the earbuds’ firmware if available.

Return the earbuds to the charging case and close the case.

The earbuds will automatically power off after 30 minutes if they are not connected. The duration can be set in the soundcore app.

Reset if the earbuds have issues pairing with each other or with other devices.

Delete the pairing history from your Bluetooth device first. Place the earbuds in the charging case and leave the case open. Then press and hold the button on the case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence.

Steady white Flashing white

Flashing white in sequence Light off

You will be informed once the new version of firmware is detected when you connect the earbuds with the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is completed. During the update, ensure the earbuds are being charged and avoid any usage.

Specifications are subject to change without notice.

Input	5 V       0.65 A
Rated output power	2.2 mW
Battery capacity	53 mAh x 2 (earbuds); 800 mAh (charging case)
Charging time	2 hours
Playtime (with ANC off)	Up to 10 hours (Total 50 hours with the charging case)
Playtime (with ANC on)	Up to 8 hours (Total 40 hours with the charging case)
Driver unit	10 mm dynamic driver
Frequency response	20 Hz – 20 kHz
Impedance	16 ѷ
Waterproof level (Earbuds)	IPX4
Bluetooth version	5.2
Bluetooth range	10 m / 33 ft